PDF
FLIP
How to Cite
Ruiz-Botero, M., Zuluaga-Bedoya, C., Ospina-Alarcon, M., & Garcia-Tirado, J. (2016). Comparison of empirical correlations for the estimation of the oxygen transfer coefficient in an aerobic bioprocess. Ingenierías USBmed, 7(2), 14–20. https://doi.org/10.21500/20275846.2618
More Citation Formats
License terms
▼
This journal provides immediately free access to its contents under the principle that make available the research results for free to the public, helps for a greater global exchange of knowledge.
Therefore, the journal invokes the Creative Commons 4.0
License attributions: Recognition – Non-commertial - Share equal. Commercial use and distribution of original or derivative works are not permitted and must be done with a equal license as the one that regulate the original work.
Abstract
This paper shows a comparison of three different empirical correlations found in the literature for the estimation of the oxygen transfer coefficient in an aeration pilot plant. To this end, a phenomenological-based semi-physical model (PBSM) of the aeration pilot plant is used. This evaluation tested the relationship between empirical correlations and the oxygen transfer phenomenon from the gas phase to the liquid phase was assessed. The results show that empirical correlations of the oxygen transfer coefficient found in the literature are not based on the knowledge of the physical phenomena, and hence are not suitable to generalize the transference mechanism in other similar processes.
References
[1] L. Åmand, “Control of aeration systems in activated sludge processes – a review,” IVL Swedish Environ. Res. Institute/Department Inf. Technol. Uppsala Univ. Uppsala, Sweden, pp. 1–19, 2011.
[2] A. Amicarelli, F. Di Sciascio, J. M. Toibero, and H. Alvarez, “Including dissolved oxygen dynamics into the Bt δ -Endotoxins Production process model and its application to process control,” Brazilian J. Chem. Eng., vol. 27, no. 01, pp. 41–62, 2010.
[3] D. M. Atia, F. H. Fahmy, N. M. Ahmed, and H. T. Dorrah, “Design and Control Strategy of Diffused Air Aeration System,” World Acad. Sci. Eng. Technol., vol. 6, no. 3, pp. 666–670, 2012.
[4] L. Åmand, G. Olsson, and B. Carlsson, “Aeration control - A review,” Water Sci. Technol., vol. 67, pp. 2374–2398, 2013.
[5] H. Álvarez, R. Lamanna, P. Vega, and S. Revollar, “Metodología para la Obtención de Modelos Semifísicos de Base Fenomenológica Aplicada a una Sulfitadora de Jugo de Caña de Azúcar,” Rev. Iberoam. Automática e Informática Ind. RIAI, vol. 6, no. 3, pp. 10–20, 2009.
[6] M. A. Kelland, Production Chemicals for the Oil and Gas Industry, Second Edition. CRC Press, 2014.
[7] P. Hui and H. Palmer, “Uncatalyzed oxidation of aqueous sodium sulfite and its ability to simulate bacterial respiration,” Biotechnol. Bioeng., vol. 37, pp. 392–396, 1991.
[8] Y. Shi, X. Zhan, L. Ma, L. Li, and C. Li, “Evaluation of antioxidants using oxidation reaction rate constants,” Front. Chem. China, vol. 2, no. 2, pp. 140–145, 2007.
[9] P. M. Wilkinson, B. Doldersum, P. H. M. R. Cramers, and L. L. Van Dierendonck, “The kinetics of uncatalyzed sodium sulfite oxidation,” Chem. Eng. Sci., vol. 48, no. 5, pp. 933–941, 1993.
[10] R. Hermann, N. Walther, U. Maier, and J. Buchs, “Optical method for the determination of the oxygen-transfer capacity of small bioreactors based on sulfite oxidation,” Biotechnol. Bioeng., vol. 74, no. 5, pp. 355–363, 2001.
[11] E. L. Schierholz, J. S. Gulliver, S. C. Wilhelms, and H. E. Henneman, “Gas transfer from air diffusers,” Water Res., vol. 40, pp. 1018–1026, 2006.
[12] K. K. Al-Ahmady, “Mathematical Model for Calculating Oxygen Mass Transfer Coefficient in Diffused Air Systems,” Al-Rafadain Eng. J., vol. 19, no. 4, pp. 43–54, 2011.
[13] E. Pittoors, Y. Guo, and S. W. H. Van Hulle, “Oxygen transfer model development based on activated sludge and clean water in diffused aerated cylindrical tanks,” Chem. Eng. J., vol. 243, pp. 51–59, 2014.
[14] M. Moltzer, “Analysis of Robust Stability of Model Predictive Control for Biological Wastewater Treatment Plants,” Eindhoven University of Technology, Eindhoven, Holanda, 2008.
[15] M. Henze, W. Gujer, T. Mino, and M. C. M. van Loosdrecht, “Activated Sludge Models ASM1, ASM2, ASM2d and ASM3,” IWA Publ., p. 121, 2000.
[2] A. Amicarelli, F. Di Sciascio, J. M. Toibero, and H. Alvarez, “Including dissolved oxygen dynamics into the Bt δ -Endotoxins Production process model and its application to process control,” Brazilian J. Chem. Eng., vol. 27, no. 01, pp. 41–62, 2010.
[3] D. M. Atia, F. H. Fahmy, N. M. Ahmed, and H. T. Dorrah, “Design and Control Strategy of Diffused Air Aeration System,” World Acad. Sci. Eng. Technol., vol. 6, no. 3, pp. 666–670, 2012.
[4] L. Åmand, G. Olsson, and B. Carlsson, “Aeration control - A review,” Water Sci. Technol., vol. 67, pp. 2374–2398, 2013.
[5] H. Álvarez, R. Lamanna, P. Vega, and S. Revollar, “Metodología para la Obtención de Modelos Semifísicos de Base Fenomenológica Aplicada a una Sulfitadora de Jugo de Caña de Azúcar,” Rev. Iberoam. Automática e Informática Ind. RIAI, vol. 6, no. 3, pp. 10–20, 2009.
[6] M. A. Kelland, Production Chemicals for the Oil and Gas Industry, Second Edition. CRC Press, 2014.
[7] P. Hui and H. Palmer, “Uncatalyzed oxidation of aqueous sodium sulfite and its ability to simulate bacterial respiration,” Biotechnol. Bioeng., vol. 37, pp. 392–396, 1991.
[8] Y. Shi, X. Zhan, L. Ma, L. Li, and C. Li, “Evaluation of antioxidants using oxidation reaction rate constants,” Front. Chem. China, vol. 2, no. 2, pp. 140–145, 2007.
[9] P. M. Wilkinson, B. Doldersum, P. H. M. R. Cramers, and L. L. Van Dierendonck, “The kinetics of uncatalyzed sodium sulfite oxidation,” Chem. Eng. Sci., vol. 48, no. 5, pp. 933–941, 1993.
[10] R. Hermann, N. Walther, U. Maier, and J. Buchs, “Optical method for the determination of the oxygen-transfer capacity of small bioreactors based on sulfite oxidation,” Biotechnol. Bioeng., vol. 74, no. 5, pp. 355–363, 2001.
[11] E. L. Schierholz, J. S. Gulliver, S. C. Wilhelms, and H. E. Henneman, “Gas transfer from air diffusers,” Water Res., vol. 40, pp. 1018–1026, 2006.
[12] K. K. Al-Ahmady, “Mathematical Model for Calculating Oxygen Mass Transfer Coefficient in Diffused Air Systems,” Al-Rafadain Eng. J., vol. 19, no. 4, pp. 43–54, 2011.
[13] E. Pittoors, Y. Guo, and S. W. H. Van Hulle, “Oxygen transfer model development based on activated sludge and clean water in diffused aerated cylindrical tanks,” Chem. Eng. J., vol. 243, pp. 51–59, 2014.
[14] M. Moltzer, “Analysis of Robust Stability of Model Predictive Control for Biological Wastewater Treatment Plants,” Eindhoven University of Technology, Eindhoven, Holanda, 2008.
[15] M. Henze, W. Gujer, T. Mino, and M. C. M. van Loosdrecht, “Activated Sludge Models ASM1, ASM2, ASM2d and ASM3,” IWA Publ., p. 121, 2000.
Downloads
Download data is not yet available.
Cited by
